Reference Guide

Address Table Commands 409
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Port Status Learning Action Max Trap Frequency
------- -------- --------- ------ --- ------- --------
gi1/0/ 1 Enabled Max- Discard 3 Enabled 100
Addresses
gi1/0/ 2 Disabled Max- - 28 - -
Addresses
gi1/0/ 3 Enabled Lock Discard, 8 Disabled -
Shutdown
The following table describes the fields shown above.
show ports security addresses
Use the show ports security addresses Privileged EXEC mode command to
display the current dynamic addresses in locked ports.
Syntax
show ports security addresses [ interface-id | detailed]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Field Description
Port The port number.
Status The port security status. The possible values are: Enabled or
Disabled.
Mode The port security mode.
Action The action taken on violation.
Maximum The maximum number of addresses that can be associated on
this port in the Max-Addresses mode.
Trap The status of SNMP traps. The possible values are: Enable or
Disable.
Frequency The minimum time interval between consecutive traps.