Reference Guide

Port Channel Commands 383
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Port_Channel.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Example
console#
console# configure
console(config)# port-channel load-balance src-dst-mac
console(config)# port-channel load-balance src-dst-ip
console(config)# port-channel load-balance src-dst-mac-ip
console(config)# port-channel load-balance src-dst-mac-ip-port
console(config)#
show interfaces port-channel
Use the show interfaces port-channel EXEC mode command to display port-
channel information for all port channels or for a specific port channel.
Syntax
show interfaces port-channel [ interface-id ]
Parameters
interface-id—Specify an interface ID. The interface ID must be a Port
Channel.
Command Mode
EXEC mode
Example
The following example displays information on all port-channels.
console#
console# show interfaces port-channel
Load balancing: src-dst-mac.
Gathering information...
Channel Ports
------- -----
Po1 Active:
gi1/0/ 1,Inactive: gi1/0/ 2-3
Po2 Active:
gi1/0/ 25 Inactive: gi1/0/ 24