Reference Guide

356 Power over Ethernet (PoE) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\PoE.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
power inline limit-mode
Use the power inline limit-mode Global Configuration mode command to
set the power limit mode of the system. Use the no form of this command to
return to the default.
Syntax
power inline limit-mode {port | max-port-power }
no power inline limit-mode
Parameters
• port — The power limit of a port depends on port configuration
•
max-port-power — In this mode, each port can get up to the maximum
power, which is 15.4W.
Command Mode
Global Configuration mode
User Guidelines
Changing the PoE limit mode of the system turns the power OFF and ON for
all PoE ports.
Example
The following example sets the power limit to port.
switchxxxxxx(config)# power inline limit-mode port
power inline powered-device
Use the power inline powered-device Interface Configuration mode
command to add a description of the powered device type. Use the no form of
this command to remove the description.
Syntax
power inline powered-device pd-type
no power inline powered-device