Reference Guide

352 PHY Diagnostics Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Phy_Diagnostics.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Example
The following example displays the estimated copper cable length attached to
all present ports.
show fiber-ports optical-transceiver
Use the show fiber-ports optical-transceiver EXEC mode command to
display the optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [interface interface-id [detailed]| all-
ports]
Parameters
• interface-id —Specifies an interface ID. The interface ID must be an
Ethernet port.
•
detailed —Displays detailed diagnostics.
•
all-ports —Displays diagnostics for non-present as well as present ports.
Default Configuration
Display is for present ports.
Command Mode
EXEC mode
Console> show cable-diagnostics cable-length
Port
----
gi1/0/ 1
gi1/0/ 2
gi1/0/ 3
gi1/0/ 4
Length [meters]
-----------------
< 50
Copper not active
110-140
Fiber