Reference Guide

PHY Diagnostics Commands 351
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Phy_Diagnostics.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
show cable-diagnostics cable-length
Use the show cable-diagnostics cable-length EXEC mode command to
display the estimated copper cable length attached to all ports or to a specific
port.
Syntax
show cable-diagnostics cable-length [interface interface-id | detailed]
Parameters
• interface-id —Specify an interface ID. The interface ID must be an
Ethernet port.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default
Display is for present ports.
Command Mode
EXEC mode
User Guidelines
The port must be active and working at 100 M or 1000 M.
gi1/0/3 Test has not been performed
gi1/0/4 Open 64 13:32:00 23 July 2010
gi1/0/5 Fiber - -