Reference Guide

Ethernet Configuration Commands 337
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Flow Admin
Ch Type Speed Neg Control State
------ ------ ----- -------- ------- -----
Po1 Disabled Off Up
show interfaces status
Use the show interfaces status EXEC mode command to display the status of
all configured interfaces or of a specific interface.
Syntax
show interfaces status [ interface-id | detailed]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default Configuration
Display is for present ports.
Command Mode
EXEC mode
Example
The following example displays the status of all present configured interfaces.
console# show interfaces status
Flow Link Back Mdix
Port Type Duplex Speed Neg ctrl State Pressure Mode
------ --------- ------ ----- -------- ---- ------ -------- --
gi1/0/ 1 1G-Copper Full 1000 Disabled Off Up Disabled Off
gi1/0/ 2 1G-Copper -- -- -- -- Down -- --