Reference Guide

336 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Example
The following example reactivates gigabitethernet port 1/0/ 1.
Console# set interface active gi1/0/ 1
show interfaces configuration
Use the show interfaces configuration EXEC mode command to display the
configuration for all configured interfaces or for a specific interface.
Syntax
show interfaces configuration [ interface-id | detailed]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default Configuration
Display is for present ports.
Command Mode
EXEC mode
Example
The following example displays the configuration of all present configured
interfaces:
console# show interfaces configuration
Flow Admin Back Mdix
Port Type Duplex Speed Neg control State Pressure Mode
------ --------- ------ ----- -------- ------- ----- -------- -
gi1/0/ 1 1G-Copper Full 10000 Disabled Off Up Disabled Off
gi1/0/ 2 1G-Copper Full 1000 Disabled Off Up Disabled Off