Reference Guide

Ethernet Configuration Commands 335
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Syntax
clear counters [ interface-id ]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
Example
The following example clears the statistics counters for gigabitethernet port
1/0/5.
Console# clear counters gi1/0/ 5 .
set interface active
Use the set interface active EXEC mode command to reactivate an interface
that was shut down.
Syntax
set interface active { interface-id }
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active,
but were shut down by the system.