Manualshelf

Reference Guide

ManualsBrandsDell ManualsDesktopPOWERCONNECT 5524
331332333334335336337338339340
334 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Example
The following example enables back pressure on port
gi1/0/
5.
Console(config)#
interface
gi1/0/
5
Console(config-if)#
back-pressure
port jumbo-frame
Use the port jumbo-frame Global Configuration mode command to enable
jumbo frames on the device. Use the no form of this command to disable
jumbo frames.
Syntax
port jumbo-frame
no port jumbo-frame
Default Configuration
Jumbo frames are disabled on the device.
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after resetting the device.
Example
The following example enables jumbo frames on the device.
Console(config)#
port jumbo-frame
clear counters
Use the clear counters EXEC mode command to clear counters on all or on a
specific interface