Manualshelf

Reference Guide

ManualsBrandsDell ManualsDesktopPOWERCONNECT 5524
331332333334335336337338339340
Ethernet Configuration Commands 333
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Default Configuration
The default setting is On.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example enables automatic crossover on port 1/5.
Console(config)#
i
nterface gi1/0/1/5
Console(config-if)# mdix auto.
The following example enables automatic crossover on port
gigabitethernet
1/0/
1.
Console(config)#
interface
gi1/0/
5
Console(config-if)#
mdix auto
back-pressure
Use the back-pressure Interface Configuration (Ethernet) mode command to
enable back pressure on a specific interface. Use the no form of this
command to disable back pressure.
Syntax
back-pressure
no back-pressure
Default Configuration
Back pressure is enabled.
Command Mode
Interface Configuration (Ethernet) mode