Reference Guide

332 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Parameters
• aut —Specifies auto-negotiation.
•
on —Enables Flow Control.
•
off —Disables Flow Control.
Default Configuration
Flow control is enabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
Use the negotiation command to enable flow control auto.
Example
The following example enables Flow Control on port gi1/0/ 1
Console(config)# interface gi1/0/ 1
Console(config-if)# flowcontrol on
mdix
Use the mdix Interface Configuration (Ethernet) mode command to enable
cable crossover on a given interface. Use the no form of this command to
disable cable crossover.
Syntax
mdix {on | auto}
no mdix
Parameters
• on —Enables manual MDIX.
•
auto —Enables automatic MDI/MDIX.