Reference Guide

172 SNMP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Default Configuration
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
Example
The following example enables SNMP failed authentication traps.
Console(config)# snmp-server trap authentication
snmp-server contact
Use the snmp-server contact Global Configuration mode command to
configure the system contact (sysContact) string. Use the no form of the
command to remove the system contact information.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
text—Specifies the string describing system contact information. (Length:
1–160 characters)
Command Mode
Global Configuration mode
Example
The following example configures the system contact point called
Technical_Support.
Console(config)# snmp-server contact Technical_Support