Reference Guide

SNMP Commands 171
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
User Guidelines
A remote engine ID is required when an SNMP version 3 inform is
configured. The remote engine ID is used to compute the security digest for
authenticating and encrypting packets sent to a user on the remote host.
snmp-server enable traps
Use the snmp-server enable traps Global Configuration mode command to
enable the device to send SNMP traps. Use the no form of the command to
disable SNMP traps.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
SNMP traps are enabled.
Command Mode
Global Configuration mode
Example
The following example enables SNMP traps.
Console(config)# snmp-server enable traps
snmp-server trap authentication
Use the snmp-server trap authentication Global Configuration mode
command to enable the device to send SNMP traps when authentication
fails. Use the no form of this command to disable SNMP failed
authentication traps.
Syntax
snmp-server trap authentication
no snmp-server trap authentication