Quick Reference Guide

500 802.1x Commands
Examples
show dot1x
The show dot1x Privileged EXEC mode command displays 802.1X status for the switch or for the
specified interface.
Syntax
• show dot1x [ ethernet interface ]
• interface — The full syntax is: port .
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays 802.1X status for the switch.
Console(config-if)# dot1x send-async-request-id
Console(config-if)#
Console# show dot1x
Interface Admin Mode Oper Mode Reauth
Control
Reauth
Period
Username
--------- ---------- ---------- -------- ------ --------
g1 Auto Authorized Ena 3600 Bob
g2 Auto Authorized Ena 3600 John
g3 Auto Unauthorized Ena 3600 Clark
g4 Force-auth Authorized Dis 3600 n/a
5400_CLI.book Page 500 Wednesday, December 17, 2008 4:33 PM