Quick Reference Guide

318 RMON Commands
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
• Alarm index — 1000
•Variable identifier — dell
• Sample interval — 360000 seconds
• Rising threshold — 1000000
• Falling threshold — 1000000
• Rising threshold event index — 10
• Falling threshold event index — 20
show rmon alarm-table
The show rmon alarm-table User EXEC mode command displays the alarms summary table.
Syntax
• show rmon alarm-table
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Console (config)# rmon alarm 1000 dell 360000 1000000 1000000 10 20
5400_CLI.book Page 318 Wednesday, December 17, 2008 4:33 PM