Quick Reference Guide

Management ACL 273
management access-class
The management access-class Global Configuration mode command defines which management
Access-List is used. Use the no form of this command to disable restriction.
Syntax
• management access-class { console-only | name }
• no management access-class
• name — Name of the Access List. If unspecified, defaults to an empty Access-List. (Range: 1 - 32
characters)
• console-only — The device can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures an Access-List called ’mlist’ as the management Access-List.
show management access-list
The show management access-list Privileged EXEC mode command displays management access-lists.
Syntax
• show management access-list [ name ]
• name — Name of the Access List. If unspecified, defaults to an empty Access-List. (Range: 1 - 32
characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Console (config)# management access-class mlist
5400_CLI.book Page 273 Wednesday, December 17, 2008 4:33 PM