Quick Reference Guide

LACP Commands 243
LACP Commands
lacp system-priority
The lacp system-priority Global Configuration mode command configures the system priority. Use
the no form of this command to reset to default.
Syntax
• lacp system-priority value
• no lacp system-priority
• value — Value of the priority. (Range: 1 - 65535)
Default Configuration
The default system priority value is 1.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
lacp port-priority
The lacp port-priority Interface Configuration mode command configures the priority value for
physical ports. Use the no form of this command to reset to default priority value.
Syntax
• lacp port-priority value
•no lacp port-priority
• value — Port priority value. (Range: 1 - 65535)
Console (config)# lacp system-priority 120
5400_CLI.book Page 243 Wednesday, December 17, 2008 4:33 PM