Quick Reference Guide

240 iSCSI Commands
Example
The following example displays the iSCSI settings.
show iscsi sessions
The show iscsi sessions Privileged EXEC mode command displays the iSCSI sessions.
Syntax
• show iscsi sessions [ detailed ]
• detailed — Displayed list is detailed when this option is used.
Default Configuration
If not specified, sessions are displayed in short mode (not detailed).
Command Mode
Privileged EXEC mode.
Console # show iscsi
iSCSI enabled
iSCSI vpt is 5, remark
Session aging time: 60 min
Maximum number of connections is 256
--------------------------------------------------
iSCSI targets and TCP ports:
---------------------------
TCP Port Target IP Address Name
860
3260
5000
30001 172.16.1.1 iqn.1993-11.com.disk-
vendor:diskarrays.sn.
45678.tape:sys1.xyz
30033 172.16.1.10
30033 172.16.1.25
5400_CLI.book Page 240 Wednesday, December 17, 2008 4:33 PM