User guide

96 Configuring System Information
The following is an example of the CLI commands:
logging buffered level Limits syslog messages displayed from an internal buffer
(RAM) based on severity.
logging file level Limits syslog messages sent to the logging file based on
severity.
clear logging Clears logs.
clear logging file Clears
messages from the logging file .
show syslog servers Displays the syslog servers settings.
Table 6-11. Global Log Parameters CLI Commands (continued)
CLI Command Description
Console (config)# logging on
Console (config)# logging console errors
Console (config)# logging buffered debugging
Console (config)# logging file alerts
Console (config)# clear logging
Console (config)# exit
Console# clear logging file
Clear Logging File [y/n]y
Console# show syslog-servers
Device Configuration
-----------------------------
IP address Port facility Severity Description
---------- ---- -------- -------- -----------
1.1.1.1 514 local7 info
fe80::11%vlan1 514 local7 info
3211::22 514 local7 info