User guide

80 Configuring System Information
Resetting the Device
The Reset page enables the device to be reset from a remote location. Save all changes to the Running
Configuration file before resetting the device. This prevents the current device configuration from being
lost. For more information about saving Configuration files, see "Managing Files" on page 220
.To open
the Reset page, click System
→ General → Reset in the tree view.
Figure 6-6. Reset
Resetting the Device
1 Open the Reset page
2 Click reset .
A confirmation message displays.
3 Click OK .
The device is reset. After the device is reset, a prompt for a user name and password displays.
4 Enter a user name and password to reconnect to the Web Interface.
Resetting the Device Using the CLI
The following table summarizes the equivalent CLI commands for performing a reset of the device via
the CLI:
Table 6-5. Reset CLI Command
CLI Command Description
reload Reloads the operating system.