User guide

414 Configuring Quality of Service
Enabling Trust:
1 Open the CoS Settings page .
2 Select Trust in the Trust Mode field.
3 Click Apply Changes.
Trust is enabled on the device.
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the CoS
Settings page.
The following is an example of the CLI commands:
Defining QoS Interface Settings
The Interface Settings page contains fields for defining, per interface, if the selected Trust mode is to be
activated. The default priority for incoming untagged packets is also selected in the Interface Settings
page. To open the Interface Settings page, click Quality of Service → CoS Global Parameters→ Interface
Settings in the tree view.
Table 9-3. CoS Setting CLI Commands
CLI Command Description
qos trust [cos | dscp]
Configures the system to basic mode and the
"trust" state.
no cos trust
Returns to the non-trusted state.
Console (config)# cos trust dscp