User guide

Viewing Statistics 405
Figure 8-14. Port Statistics
• Interface Statistics — Selects the type of interface statistics to open.
•
Etherlike Statistics — Selects the type of Etherlike statistics to open.
•
RMON Statistics — Selects the type of RMON statistics to open.
•
GVRP Statistics — Selects the GVRP statistics type to open.
•
Refresh Rate — Amount of time that passes before the statistics are refreshed.
Displaying Port Statistics
1 Open the Port Statistics page.
2 Select the statistic type to open.
3 Select the desired refresh rate from the Refresh Rate drop-down menu.
4 Click Draw .
The graph for the selected statistic is displayed.
Viewing Port Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing port statistics.
Table 8-11. Port Statistic CLI Commands
CLI Command Description
show interfaces counters
[ethernet interface
|
port-channel port-channel-number]
Displays traffic seen by the physical
interface.
show rmon statistics
{ethernet interface |
port-channel port-channel-number}
Displays RMON Ethernet statistics.