User guide

Viewing Statistics 381
• Internal MAC Receive Errors — Number of internal MAC received errors on the selected interface.
•
Receive Pause Frames — Number of received paused frames on the selected interface.
•
Transmitted Paused Frames — Number of paused frames transmitted from the selected interface.
Displaying Etherlike Statistics for an Interface
1 Open the Etherlike Statistics page.
2 Select an interface in the Interface field.
The interface’s Etherlike statistics are displayed.
Resetting Etherlike Statistics
1 Open the Etherlike Statistics page.
2 Click Reset All Counters .
The Ethernetlike statistics are reset.
Viewing Etherlike Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing etherlike statistics.
Table 8-2. Etherlike Statistics CLI Commands
CLI Command Description
show interfaces counters [ethernet
interface
| port-channel port-
channel-number
]
Displays traffic seen by the physical
interface.