User guide

378 Viewing Statistics
Receive Statistics
• Total Bytes (Octets) — Number of octets received on the selected interface.
•
Unicast Packets — Number of Unicast packets received on the selected interface.
•
Multicast Packets — Number of Multicast packets received on the selected interface.
•
Broadcast Packets — Number of Broadcast packets received on the selected interface.
•
Packets with Errors — Number of error packets received from the selected interface.
Transmit Statistics
• Total Bytes (Octets) — Number of octets transmitted on the selected interface.
•
Unicast Packets — Number of Unicast packets transmitted on the selected interface.
•
Multicast Packets — Number of Multicast packets transmitted on the selected interface.
•
Broadcast Packets — Number of Broadcast packets transmitted on the selected interface.
•
Packets with Errors — Number of error packets transmitted from the selected interface.
Displaying Interface Statistics
1 Open the Interface Statistics page.
2 Select an interface in the Interface field.
The interface statistics are displayed.
Resetting Interface Statistics Counters
1 Open the Interface Statistics page.
2 Click Reset All Counters .
The interface statistics counters are reset.
Viewing Interface Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing interface statistics.
Table 8-1. Interface Statistics CLI Commands
CLI Command Description
show interfaces counters
[ethernet
interface | port-channel port-
channel-number
]
Displays traffic seen by the physical
interface.