User guide

376 Viewing Statistics
• % Interface Utilization — Network interface utilization percentage based on the duplex mode of the
interface. The range of this reading is from 0 to 200%. The maximum reading of 200% for a full duplex
connection indicates that 100% of bandwidth of incoming and outgoing connections is used by the
traffic travelling through the interface. The maximum reading for a half duplex connection is 100%.
•
% Unicast Received — Percentage of Unicast packets received on the interface.
•
% Non Unicast Packets Received — Percentage of non-Unicast packets received on the interface.
•
% Error Packets Received — Number of packets with errors received on the interface.
•
Global System LAG — Current LAG/trunk performance.
Viewing Counter Summary
The Counter Summary page contains statistics for port utilization in numeric sums as opposed to
percentages. To open the Counter Summary page, click Statistics/RMON→ Tab le Vie w s→ Counter
Summary in the tree view.
Figure 8-2. Counter Summary
• Refresh Rate — The amount of time that passes before the interface statistics are refreshed.
•
Interface — The interface number.
•
Interface Status — The interface status.
•
Received Unicast Packets — Number of received Unicast packets on the interface.
•
Received Non Unicast Packets — Number of received non-Unicast packets on the interface.
•
Transmit Unicast Packets — Number of transmitted Unicast packets from the interface.