User guide

368 Configuring Device Information
Configuring IGMP Snooping with CLI Commands
The following table summarizes the equivalent CLI commands for configuring IGMP Snooping on the
device:
Table 7-41. IGMP Snooping CLI Commands
CLI Command Description
ip igmp snooping Enables Internet Group Membership Protocol (IGMP)
snooping.
ip igmp snooping mrouter learn-pim-dvmrp Enables automatic learning of Multicast router ports in the
context of a specific VLAN.
ip igmp snooping host-time-out
time-out Configures the host-time-out.
ip igmp snooping mrouter-time-out
time-out Configures the mrouter-time-out.
ip igmp snooping leave-time-out {
time-out |
immediate-leave}
Configures the leave-time-out.
ip igmp snooping querier enable
no ip igmp snooping querier enable
Enables Internet Group Management Protocol (IGMP) querier
on a specific VLAN. Use the no form of this command to
disable.
ip igmp snooping querier address
ip-address
no ip igmp snooping querier address
Defines the source IP address that the IGMP Snooping querier
would use. Use the no form of this command to return to
default.
show ip igmp snooping groups [vlan vlan-id]
[address ip-multicast-address
]
Displays the Multicast groups learned by IGMP snooping.
show ip igmp snooping interface vlan-id Displays IGMP snooping configuration.
show ip igmp snooping mrouter [interface vlan-
id]
Displays information about dynamically learned Multicast
router interfaces.