User guide

Configuring Device Information 365
The following is an example of the CLI commands:
console(config)#vlan database
console(config-if)#vlan 8
console(config-vlan)#exit
console(config)#interface range ethernet g1-9
console(config-if)# switchport mode general
console(config-if)# switchport general allow vlan add 8
Console(config-if)# exit
console(config)#interface vlan 8
Console(config-if)# bridge multicast address 0100.5e02.0203
add ethernet g1-9
Console(config-if)# exit
Console (config)# interface VLAN 1
Console (config-if)# bridge multicast forward-all add ethernet
g8
Console(config-if)# end
Console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: Forward-All
Port Static Status
------- ----------------- -----------
g1 Forbidden Filter
g2 Forward Forward(s)
g3 - Forward(d)