User guide

Configuring Device Information 357
• Bridge Multicast Filtering — Enables or disables bridge Multicast filtering. Disabled is the default
value. IGMP Snooping can be enabled only if
Bridge Multicast Filtering is enabled.
•
IGMP Snooping Status — Enables or disables IGMP Snooping on the device. Disabled is the
default value.
Enabling Bridge Multicast Filtering on the Device
1 Open the Multicast Global Parameters page.
2 Select Enable in the Bridge Multicast Filtering field.
3 Click Apply Changes .
Bridge Multicast
is enabled on the device.
Enabling IGMP Snooping on the Device
1 Open the Multicast Global Parameters page.
2 Select Enable in the IGMP Snooping Status field.
3 Click Apply Changes .
IGMP Snooping is enabled on the device.
Enabling Multicast Forwarding and IGMP Snooping Using CLI Commands
The following table summarizes the equivalent CLI commands for enabling Multicast forwarding and
IGMP Snooping as displayed on the Multicast Global Parameters page.
The following is an example of the CLI commands:
Table 7-38. Multicast Forwarding and Snooping CLI Commands
CLI Command Description
bridge multicast filtering Enables filtering of Multicast addresses.
ip igmp snooping Enables Internet Group Membership
Protocol (IGMP) snooping.
Console (config)# bridge multicast filtering
Console (config)# ip igmp snooping