User guide

Configuring Device Information 339
Adding Protocol Ports
The Protocol Port page adds interfaces to Protocol groups. To open the Protocol Port page,
click Switch→ VLAN→ Protocol Port in the tree view.
Figure 7-46. Protocol Port
• Interface — Port or LAG number added to a protocol group.
•
Group ID — Protocol group ID to which the interface is added. Protocol group IDs are defined in the
Protocol Group Table.
•
VLAN ID (1-4095) — Attaches the interface to a user-defined VLAN ID. The VLAN ID is defined on
the
Create a New VLAN page. Protocol ports can either be attached to a VLAN ID or a VLAN
nameVLAN 4095 is the discard VLAN.
Adding a New Protocol Port
Protocol ports can be defined only on ports that are defined as General in the VLAN Port Settings page.
1
Open the Protocol Port page.
2 Click Add .
The
Add Protocol Port page opens.
3 Complete the fields in the dialog.
4 Click Apply Changes .
The new VLAN protocol group is added to the
Protocol Port Table , and the device is updated.