User guide

338 Configuring Device Information
Assigning VLAN Protocol Group Settings
1 Open the Protocol Group page.
2 Complete the fields on the page.
3 Click Apply Changes .
The VLAN protocol group parameters are defined, and the device is updated.
Removing Protocols From the Protocol Group Table
1 Open the Protocol Group page.
2 Click Show All .
The
Protocol Group Table opens.
3 Select Remove for the protocol groups that need to be removed.
4 Click Apply Changes .
The protocol is removed, and the device is updated.
Defining VLAN Protocol Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring Protocol Groups.
The following example maps ip-arp protocol to group "213":
Table 7-30. VLAN Protocol Groups CLI Commands
CLI Command Description
map protocol protocol [encapsulation]
protocols-group group
Maps a protocol to a protocol group.
Protocol groups are used for protocol-
based VLAN assignment.
Console (config)# vlan database
Console (config-vlan)# map protocol ip-arp protocols-group 213