User guide

Configuring Device Information 337
Defining VLAN Protocol Groups
• The Protocol Group page provides parameters for configuring frame types to specific protocol groups.
To open the
Protocol Group page, click Switch → VLAN → Protocol Group in the tree view.
Figure 7-45. Protocol Group
• Frame Type — The packet type. Possible field values are Ethernet , RFC1042 , and LLC Other .
•
Protocol Value — User-defined protocol name.
•
Ethernet-Based Protocol Value — The Ethernet protocol group type. The possible field values are IP ,
IPX and IPV6 .
•
Protocol Group ID — The VLAN Group ID number.
•
Remove — When selected, removes frame-to-protocol group mapping, if the protocol group to be
removed is not configured on this protocol port.
Adding a Protocol Group
1 Open the Protocol Group page.
2 Click Add.
The Add Protocol to Group page opens.
3 Complete the fields on the page.
4 Click Apply Changes .
The protocol group is assigned, and the device is updated.