User guide

300 Configuring Device Information
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for querying and sorting dynamic
addresses as displayed in the Dynamic Address Table.
The following is an example of the CLI commands:
Table 7-17. Query and Sort CLI Commands
CLI Command Description
bridge aging-time
seconds Sets the address table aging time.
show bridge address-table
[vlan
vlan ] [ethernet
interface | port-channel
port-channel-number ]
Displays classes of dynamically created
entries in the bridge-forwarding database.
Console (config)# bridge aging-time 250
Console (config)# exit
Console# show bridge address-table
Aging time is 250 sec
vlan mac address port type
---- ----------- ---- ----
1 00:60:70:4C:73:FF g8 dynamic
1 00:60:70:8C:73:FF g8 dynamic
200 00:10:0D:48:37:FF g8 static