User guide

Configuring Device Information 285
Figure 7-24. LAG Configuration
The LAG Configuration page contains the following fields:
• Load Balance — Indicates the load balancing type enabled on the LAG. The possible field values are:
–
Layer 2 — Enables load balancing based on static and dynamic MAC addresses.
–
Layer 3 — Enables load balancing based on source and destination IP addresses.
–
Layer 2-3 — Enables load balancing based on static and dynamic MAC addresses, and source and
destination IP addresses.
•
LAG — The LAG number.
•
LAG Mode — Whether the LAG is static or LACP.
•
Description (0-64 Characters) — Provides a user-defined description of the configured LAG.