User guide

264 Configuring Device Information
• Destination Address — Matches the destination MAC address to which packets are addressed to the
ACE. Wildcard masks specify which bits are used and which bits are ignored. A wildcard of 0.0.0.0
indicates that all the bits are important.
•
VLAN ID — Matches the packet’s VLAN ID to the ACE. The possible field values are 1 to 4095.
•
CoS — Indicates the CoS values by which the packets are filtered.
•
Cos Mask — Indicates the CoS Mask by which the packets are filtered.
•
Ethertype — Indicates the Ethertype packet by which the packets are filtered.
•
Action — Indicates the ACL forwarding action. Possible field values are:
–
Permit — Forwards packets which meet the ACL criteria.
–
Deny — Drops packets which meet the ACL criteria.
–
Shutdown — Drops packet that meet the ACL criteria, and disables the port to which the packet
was addressed.
Adding ACEs to IP based ACLs
1 Open the Network Security - MAC Based ACL page.
2 Select an ACL.
3 Edit the relevant fields.
4 Click Apply Changes .