User guide

Configuring System Information 239
Defining iSCSI Sessions Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSI
Sessions page.
The following is an example of the CLI commands:
Figure 6-112. iSCSI Sessions CLI Commands
CLI Command Description
show iscsi sessions
[
detailed ]
To display the iSCSI sessions, use the show iscsi sessions
privileged EXEC command.
Console# show iscsi sessions
iSCSI enabled
iSCSI vpt: 5, remark
Session aging time: 60 min
Maximum number of sessions: 256
iSCSI targets and TCP ports:
---------------------------
TCP Target IP Name
Port Address
----- --------- ----
860
3260
5000
30001 172.16.1.1 iqn.1993-11.com.disk-
vendor:diskarrays.sn.45678.tape:sys1.xyz
30033 172.16.1.10
30033 172.16.1.25