User guide

236 Configuring System Information
Managing iSCSI Targets
The iSCSI Targets Table contains information about iSCSI targets in the network.
To open the iSCSI Targets Table, click System
→ iSCSI Optimization→ iSCSI Targets in the tree view.
Figure 6-108. iSCSI Targets Table
• TCP Port — The TCP port used by the target for iSCSI communications.
•
IP Address — The IP address of the target. The IP address 0.0.0.0 is any IP address.
•
Target Name — The name of the target.
•
Remove — Used to remove targets from the table.
Adding Targets
1 Open the iSCSI Targets Table .
2 Click Add .
The
Add iSCSI Target page opens.
Figure 6-109. Add iSCSI Target