User guide

234 Configuring System Information
Defining iSCSI Global Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSI
Global Parameters page.
Figure 6-106. iSCSI Global Parameters CLI Commands
CLI Command Description
iscsi enable
no iscsi enable
To globally enable iSCSI awareness use
the iscsi enable command in global
configuration mode. To disable iSCSI
awareness use the no form of this
command.
iscsi cos {up
vpt |
dscp
dscp } [remark]
[bandwidth
flow-
bandwidth
]
[burstsize
flow-
burstsize
]
no iscsi cos
To set the quality of service profile that
will be applied to iSCSI flows use the iscsi
cos command. To return to default, use
the no form of this command.
iscsi aging time
time
no iscsi aging time
To set aging time for iSCSI sessions use
the iscsi aging time command in global
configuration mode. To cancel aging, use
the no form of this command.
show iscsi To display the iSCSI settings, use the
show iscsi privileged EXEC command.