User guide

Configuring System Information 219
Configuring SNMP Notification Recipients Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Notification Recipients page.
The following is an example of the CLI commands:
Table 6-46. SNMP Notification Recipients CLI Commands
CLI Command Description
snmp-server host {
ipaddress |
hostname } community-string [traps |
informs] [1 | 2] [udp-port
port ]
[filter
filtername ] [timeout
seconds ] [retries retries ]
Creates or updates a notification recipient
receiving notifications in SNMP version 1 or 2.
snmp-server v3-host {ip- address |
hostname } username [traps | informs]
{noauth | auth | priv} [udp-port
port ] [filter filtername ] [timeout
seconds ] [retries retries ]
Creates or updates a notification recipient
receiving notifications in SNMP version 3.
show snmp Shows the current SNMP configuration.
console (config)# snmp-server host 172.16.1.1 private
console# show snmp
Community-String Community-Access View name IP address
---------------- ---------------- --------- ----------
public read only user-view All
private read write default 172.16.1.1
private su DefaultSuper 172.17.1.1