User guide

Configuring System Information 205
• Authentication Key (MD5-16; SHA-20 hexa chars) — Defines the HMAC-MD5-96 or HMAC-SHA-96
authentication level. The authentication and privacy keys are entered to define the authentication key.
If only authentication is required, 16 bytes are defined for MD5. If both privacy and authentication are
required, 32 bytes are defined for MD5. Each byte in hexadecimal character strings is two hexadecimal
digits. Each byte can be separated by a period or a colon.
•
Privacy Key (16 hexa characters) — If only authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 16 bytes are defined. Each byte in hexadecimal character
strings is two hexadecimal digits. Each byte can be separated by a period or colon.
•
Remove — When checked, removes users from a specified group.
Adding Users to a Group
1 Open the User Security Model page.
2 Click Add .
The Add User Name page opens:
Figure 6-90. Add SNMPv3 User Name
3 Define the relevant fields.
4 Click Apply Changes .
The user is added to the group, and the device is updated.