User guide

200 Configuring System Information
Defining SNMP Views Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3 View Settings page.
The following is an example of CLI commands:
Defining SNMP Access Control
The Access Control Add Group page provides information for creating SNMP groups, and assigning
SNMP access control privileges to SNMP groups. Groups allow network managers to assign access rights
to specific device features, or features aspects. To open the Access Control Group page, click System→
SNMP → Access Control in the tree view.
Figure 6-85. SNMP View CLI Commands
CLI Command Description
snmp-server view
view-name oid-tree
{included | excluded}
Creates or updates a view entry.
show snmp views [
viewname ] Displays the configuration of views.
Console (config)# snmp-server view user1 1 included
Console (config)# end
Console # show snmp views
Name OID Tree Type
------------- ----------------- --------
user1 iso included
Default iso included
Default snmpVacmMIB excluded
Default usmUser excluded
Default rndCommunityTable excluded
DefaultSuper iso included