User guide

176 Configuring System Information
Configuring RADIUS Global Parameters
Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks.
RADIUS servers provide a centralized authentication method for:
• Telnet Access
• Web Access
• Console to Device Access
To open the RADIUS Settings page, click System → Management Security → RADIUS in the tree view.
Figure 6-67. RADIUS Settings
• IP Address — The list of Authentication Server IP addresses.
•
Priority (1-65535) — Specifies the server priority. The possible values are 1-65535, where 1 is the
highest value. This is used to configure the order in which servers are queried.
•
Authentication Port — Identifies the authentication port. The authentication port is used to verify
the RADIUS server authentication.