User guide

Configuring System Information 175
The following is an example of the CLI commands:
tacacs-server key key-string
Specifies the authentication and encryption key for all
TACACS+ communications between the device and the
TACACS+ server. This key must match the encryption used on
the TACACS+ daemon. (Range: 0 - 128 characters.)
tacacs-server timeout timeout Specifies the timeout value in seconds. (Range: 1 - 30.)
tacacs-server source-ip source Specifies the source IP address. (Range: Valid IP Address.)
show TACACS [ip-address] Displays configuration and statistics for a TACACS+ server.
Table 6-37. TACACS+ CLI Commands (continued)
CLI Command Description
Console# show tacacs
Router Configuration
----------- --------- ----- ---------- ---------- --------- ---------
IP address Status Port Single
Connection
TimeOut Source IP Priority
----------- --------- ----- ---------- ---------- --------- ---------
12.1.1.2 Not
Connected
49 Yes 1 12.1.1.1 1
Global values
-----------------
TimeOut : 5
Router Configuration
-----------------
Source IP : 0.0.0.0
console#