User guide

Configuring System Information 167
Displaying the Local User Table:
1 Open the Local User Database page.
2 Click Show All.
The Local User Table opens:
Figure 6-61. Local User Table
Reactivating a Suspended User:
1 Open the Local User Database page.
2 Click Show All.
The Local User Table opens.
3 Select a User Name entry.
4 Select the Reactivate Suspended User check box.
5 Click Apply Changes .
The user access rights are reactivated, and the device is updated.
Deleting Users:
1 Open the Local User Database page.
2 Click Show All.
The Local User Table opens.
3 Select a User Name.
4 Select the Remove check box.
5 Click Apply Changes .
The selected user is deleted and the device is updated.
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Local
User Database page.