User guide

Configuring System Information 143
exception of the Approximated Cable Length test. The cable length returned is an approximation in the
ranges of up to 50 meters, 50m-80m, 80m-110m, 110m-120m, or more than 120m. The deviation may be
up to 20 meters.
To open the Integrated Cable Test for Copper Cables page, click System→ Diagnostics→ Integrated
Cable Test in the tree view.
Figure 6-47. Integrated Cable Test for Copper Cables
• Port — The port to which the cable is connected.
•
Test Result — The cable test results. Possible values are:
–
No Cable — There is no cable connected to the port.
–
Open Cable — The cable is connected on only one side.
–
Short Cable — A short has occurred in the cable.
–
OK — The cable passed the test.
–
Fiber Cable — A fiber cable is connected to the port.
•
Cable Fault Distance — The distance from the port where the cable error occurred.
•
Last Update — The last time the port was tested.
•
Approximate Cable Length — The approximate cable length. This test can only be performed when
the port is up and operating at 1 Gbps.