User guide

138 Configuring System Information
Displaying the Hosts Name Mapping Table
1 Open the Host Name Mapping page .
2 Click Show All .
The
Hosts Name Mapping Table opens:
Figure 6-43. Hosts Name Mapping Table
Removing Host Name from IP Address Mapping
1 Open the Host Name Mapping page .
2 Click Show All
3 The Host Mapping Table opens.
4 Select a Host Mapping Table entry.
5 Check the Remove checkbox.
6 Click Apply Changes .
The
Host Mapping Table entry is deleted, and the switch device is updated.
Mapping IP address to Domain Host Names Using the CLI Commands
The following table summarizes the equivalent CLI commands for mapping Domain Host names to
IP addresses.
Table 6-26. Domain Host Name CLI Commands
CLI Command Description
ip host name address1 [address2 … address8] Defines the static host name-to-address mapping in the host
cachefor IPv4.
no ip host name Removes the name-to-address mapping for IPv4.
ipv6 host name ipv6-address1 [ipv6-address2 …
ipv6-address8]
Defines the static host name-to-address mapping in the host
cache for IPv6.
no ipv6 host name Removes the name-to-address mappingfor IPv6.