User guide

Configuring System Information 135
The following is an example of the CLI commands:
Defining Default Domains
The Default Domain Name page provides information for defining default DNS domain names. To open
the Default Domain Name page, click System→ IP Addressing→ Default Domain Name in the tree view.
Figure 6-40. Default Domain Name
• Default Domain Name (1-158 characters) — Contains a user-defined DNS domain name server.
When selected, the DNS domain name is the default domain.
•
Ty p e — The domain type if the domain was statically or dynamically created.
•
Remove — When selected, removes a selected domain.
Defining DNS Domain Names Using the CLI Commands
The following table summarizes the CLI commands for configuring DNS domain names.
console> enable
Console# configure
console (config)# ip name-server 176.16.1.18
Table 6-25. DNS Domain Name CLI Commands
CLI Command Description
ip domain-name name Defines a default domain name that the software uses to complete unqualified host names.
no ip domain-name Disable the use of the Domain Name System (DNS).
show hosts [name] Displays the default domain name, list of name server hosts, the static and the cached list
of host names and addresses.