User guide

134 Configuring System Information
Displaying the DNS Servers Table
1 Open the Domain Naming System (DNS) page .
2 Click Show All.
The DNS Server Table opens:
Figure 6-39. DNS Server Table
Removing DNS Servers
1 Open the Domain Naming System (DNS) page .
2 Click Show All.
3 The DNS Server Table opens.
4 Select a DNS Server Table entry .
5 Select the Remove check box.
6 Click Apply Changes.
The selected DNS server is deleted, and the device is updated.
Configuring DNS Servers Using the CLI Commands
The following table summarizes the CLI commands for configuring device system information.
Table 6-24. DNS Server CLI Commands
CLI Command Description
ip name-server server-address Sets the available name servers. Up to eight name servers can be set.
no ip name-server server-address Removes a name server.
ip domain-name name Defines a default domain name that the software uses to complete
unqualified host names.
clear host {name | *} Deletes entries from the host name-to-address cache.
show hosts [name] Displays the default domain name, list of name server hosts, the static
and the cached list of host names and addresses.