User guide

Configuring System Information 129
Defining IPv6 Neighbors Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the IPv6
Neighbors page.
The following is an example of the CLI commands:
Viewing the IPv6 Routes Table
The IPv6 Routes Table stores information about IPv6 destination prefixes and how they are reached,
either directly or indirectly. The routing table is used to determine the next-hop address and the interface
used for forwarding.
Each dynamic entry also has an associated invalidation timer value (extracted from Router
Advertisements) used to delete entries that are no longer advertised.
To open the IPv6 Routes Table page, click System
→ IP Addressing→ IPv6 Routes Table in the tree view.
Table 6-22. IPv6 Neighbors Parameters CLI Commands
CLI Command Description
ipv6 neighbor ipv6_addr
hw_addr {ethernet interface-
number | vlan vlan-id | port-
channel number }
Configures a static entry in the IPv6 neighbor
discovery cache.
show ipv6 neighbors {static |
dynamic}[ipv6-address ipv6-
address] [mac-address mac-
address] [ethernet interface-
number | vlan vlan-id | port-
channel number ]
Displays IPv6 neighbor discovery cache
information.
clear ipv6 neighbors Deletes all entries in the IPv6 neighbor discovery
cache.
Console# show ipv6 neighbors dynamic
Interface IPv6 address HW address State
--------- ------------ ---------- -----
VLAN 1 2031:0:130F::010:B504:DBB4 00:10:B5:04:DB:4B REACH
VLAN 1 2031:0:130F::050:2200:2AA4 00:50:22:00:2A:A4 REACH