User guide

106 Configuring System Information
New Log Server IP Address — Defines the IP address of the new Log Server.
3
Define the fields.
4 Click Apply Changes .
The server is defined and added to the
Available Servers list.
Displaying the Remote Log Servers Table:
1 Open the Remote Log Server Settings page.
2 Click Show All .
The
Remote Log Servers Table page opens:
Figure 6-21. Remote Log Servers Table
Removing a Log Server from the Log Server Table Page:
1 Open the Remote Log Server Settings page.
2 Click Show All .
The
Remote Log Servers Table page opens.
3 Select a Remote Log Servers Table entry.
4 Select the Remove check box to remove the server(s).
5 Click Apply Changes .
The
Remote Log Servers Table entry is removed, and the device is updated.
Working with Remote Server Logs Using the CLI Commands
The following table summarizes the equivalent CLI command for working with remote server logs.
Table 6-15. Remote Log Server CLI Commands
CLI Command Description
logging (ipv4-address|ipv6-addres |hostname) [port port]
[severity level] [facility facility] description text]
Logs messages to a remote server.
no logging Deletes a syslog server.
show logging Displays the state of logging and the syslog messages.