Setup Guide

122 ΟΨͼΑܳ൲୭೰
ɃɋɐȪɋɟȮȫȾʀɑǽ࿀ᰳǺ൝DzǵɁȬɋɉǽ֊ቃ▚઻ȡ⒅ǗǿƸȿɁɎɨȡǨǟǺؔΰ۝⃆
ǹᣞຎǺǨȚǢǷǛǶǜȍǨƹɃɋɐȪɋɟȮȫȾʀɑǽπ᧸ȡᭉᨪǦǵƸɏɘȬɁǽ
CLI ɪʀɑ
ǶɁȬɋɉȡཆؔǶ▚઻ǨȚǢǷȑ۝⃆ǶǨƹ
CLI ȡπ᧸ǦǵɏɘȬɁȡ▚઻ǨȚᅀᗕǺdzǓǵǾƸ
PowerConnect 5400 ȿɲʀɂǽDžɮʀȾʀɂȴȬɑdžȡڹᡄǦǵǞǯǤǓƹ
ɃɋɐȪɋɟȮȫȾʀɑǺȗșƸˁǽɝȫʀɳɑǛ▚઻ǤțȍǨƹ
• SNMP ȻɧɭɓɎȫɁɐɲɻȸǙȗȂ SNMP ᶩᥴȿɁɎɨǽ IP ȪɑɴɁ⾷Ȳɟȿɯɻ⾸
• ɮʀȾʀ۵ǷəɁɷʀɑ
• ɏɘȬɁǽ IP ȪɑɴɁ
• IP ȽɞɕɋɐɦɁȷ
• ɏɝȱɳɐȺʀɐȮȯȬǽ IP ȪɑɴɁ
ɃɋɐȪɋɟȮȫȾʀɑǺȗșƸˁǽษǛ⒙ᰳǤțȍǨƹ
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch configuration,
and gets you up and running easily and quickly. You can also skip
the setup wizard, and enter CLI mode to manually configure the switch
if you prefer. You can exit the setup wizard any time by entering
{CNTRL+Z]. The system will prompt you with a default answer.
By pressing Enter, you accept the default value.
Would you like to skip the setup wizard? [Y/N] N
<Y> ȡྍǨǷƸɃɋɐȪɋɟȮȫȾʀɑǾẹǦȍǨƹ 60 ᲈԑǺඅᵼǦǹǚDzǮ۰Ƹ
ɃɋɐȪɋɟȮȫȾʀɑǾ⅋ؔǺẹǦƸ
CLI ȻɻɅʀɳɟɵɻɟɐǛ⒙ᰳǤțȍǨƹ
<N> ȡྍǨǷƸɃɋɐȪɋɟȮȫȾʀɑǽ࿀ᰳǺ൝DzǵɏɘȬɁǽ֊ቃ▚઻ȡ⒅ǕǢǷǛǶǜȍǨƹ
ικȇ ΓΛΠͺΛί;ͻΎȜΡ <Ctrl + Z> ؋ၭȃ
ικȇ ίυϋίΠచ 60 ຟոඤ؊൞ાࣣȂΓΛΠͺΛί;ͻΎȜΡু൲
എၭȃાࣣȂ་ࢵ༗ంȃ
;ͻΎȜΡ 1
ˁǽษǛ⒙ᰳǤțȍǨƹ
The system is not setup for SNMP management by default. To manage
the switch using SNMP (required for Dell Network Manager) you can:
• Setup the initial SNMP version 2 account now.
• Return later and setup the SNMP version account. (For more
information on setting up a SNMP version 2 account, see the user
documentation).
Would you like to setup the SNMP management interface now? [Y/N] Y
ᭉᨪǦǵཆⱽ 2 Ǻ⢳ȏǺǾƸ <N> ȡྍǦȍǨƹ